Posts tagged Birthday
Card 210Created on: 13th February 2012Recipient: Purpose: BirthdayType of card: Multi-layeredCardstock was folded half. The corners were rounded. Images and sentiments were stamped onto the card.Pattern paper was cut using cookie cutters. Holes were punched at the side. The papers were then tied together with twine, and then adhere to the card.Patter paper was adhere near to the bottom of the front flap. Cupcake border was punched and adhere to the card.Tada~ The card is done!

Card 210

Created on: 13th February 2012
Recipient: 
Purpose: Birthday
Type of card: Multi-layered

Cardstock was folded half. The corners were rounded. Images and sentiments were stamped onto the card.

Pattern paper was cut using cookie cutters. Holes were punched at the side. The papers were then tied together with twine, and then adhere to the card.

Patter paper was adhere near to the bottom of the front flap. Cupcake border was punched and adhere to the card.

Tada~ The card is done!

Posted by joynwoe

Card 208Created on: 31st January 2012Recipient: ChrisPurpose: BirthdayType of card: FoldedCardstock was folded half. The corners were then rounded.MT was adhere to the card. Sentiments were stamped onto the card. Tada~ The card is done

Card 208

Created on: 31st January 2012
Recipient: Chris
Purpose: Birthday
Type of card: Folded

Cardstock was folded half. The corners were then rounded.

MT was adhere to the card. Sentiments were stamped onto the card. 

Tada~ The card is done

Posted by joynwoe

Card 207Created on: 31st January 2012Recipient: Nur Liyana, Nina Borhan & MasPurpose: BirthdayType of card: FoldedCardstock was folded half. The corners were then rounded.Sentiments were stamped onto the card. MT was adhere to the card.Tada~ The card is done

Card 207

Created on: 31st January 2012
Recipient: Nur LiyanaNina Borhan & Mas
Purpose: Birthday
Type of card: Folded

Cardstock was folded half. The corners were then rounded.

Sentiments were stamped onto the card. MT was adhere to the card.

Tada~ The card is done

Posted by joynwoe

Card 206Created on: 30th January 2012Recipient: Purpose: BirthdayType of card: FoldedCardstock was folded half. The corners were then rounded.Image was stamped directly on the card. It was then coloured with watercolour pencils.MT was adhere to the card. Sentiment was stamped below it.Tada~ The card is done

Card 206

Created on: 30th January 2012
Recipient: 
Purpose: Birthday
Type of card: Folded

Cardstock was folded half. The corners were then rounded.

Image was stamped directly on the card. It was then coloured with watercolour pencils.

MT was adhere to the card. Sentiment was stamped below it.

Tada~ The card is done

Posted by joynwoe

1 note

Card 204Created on: 26th January 2012Recipient: Purpose: BirthdayType of card: FoldedCardstock was folded half. The corners were then rounded.Image was stamped directly on the card. It was then coloured with watercolour pencils.MT was adhere to the card. Sentiment was stamped on it.Tada~ The card is done

Card 204

Created on: 26th January 2012
Recipient: 
Purpose: Birthday
Type of card: Folded

Cardstock was folded half. The corners were then rounded.

Image was stamped directly on the card. It was then coloured with watercolour pencils.

MT was adhere to the card. Sentiment was stamped on it.

Tada~ The card is done

Posted by joynwoe

Bookmark/Gift Tag 2Created on: 14th January 2012Recipient: Georgia MissGuguPurpose: BirthdayType of card: Bookmark/Gift tagReady-made tag was used.Images and sentiments were stamped onto the tag. The image was then coloured.Twine was tie to the tag.Tada~ The bookmark/gift tag is done

Bookmark/Gift Tag 2

Created on: 14th January 2012
Recipient: Georgia MissGugu
Purpose: Birthday
Type of card: Bookmark/Gift tag

Ready-made tag was used.

Images and sentiments were stamped onto the tag. The image was then coloured.

Twine was tie to the tag.

Tada~ The bookmark/gift tag is done

Posted by joynwoe

8 notes

Card 202Created on: 10th January 2012Recipient: Noor NoniPurpose: BirthdayType of card: FoldedA preprinted cardstock was used.Sentiments and images were stamped and coloured.Tada~ The card is done

Card 202

Created on: 10th January 2012
Recipient: Noor Noni
Purpose: Birthday
Type of card: Folded

A preprinted cardstock was used.

Sentiments and images were stamped and coloured.

Tada~ The card is done

Posted by joynwoe

36 notes

Card 201Created on: 8th January 2012Recipient: Min HuiPurpose: BirthdayType of card: FoldedA pre-printed cardstock was used.Image was stamped onto a cardstock, and then coloured. It was then cut to a suitable size, corners rounded, before adhering to another cardstock.It was then cut to a suitable size, corners rounded, and then adhere to another piece of cardstock.It was then cut to a suitable size, with the corners rounded.It was then adhere to the card with foam.Sentiment was stamped onto and within the card.Tada~ The card is done

Card 201

Created on: 8th January 2012
Recipient: Min Hui
Purpose: Birthday
Type of card: Folded

A pre-printed cardstock was used.

Image was stamped onto a cardstock, and then coloured. It was then cut to a suitable size, corners rounded, before adhering to another cardstock.

It was then cut to a suitable size, corners rounded, and then adhere to another piece of cardstock.

It was then cut to a suitable size, with the corners rounded.

It was then adhere to the card with foam.

Sentiment was stamped onto and within the card.

Tada~ The card is done

Posted by joynwoe

38 notes

Card 199Created on: 27th December 2011Recipient: Purpose: BirthdayType of card: EaselA cardstock was scored and folded at half-mark and 2/3 of the front flap.Background was stamped onto a white cardstock, then layered onto the card base. Image was stamped on various cardstock, cut and assembled. Sentiment was stamped onto the stamped background.Sentiment was stamped on a piece of card stock. It was then cut and the corners were rounded before layered onto another cardstock. It was then cut and the corners were rounded before layering onto another piece of cardstock. It was cut and the corners were rounded before adhering to the inside of the card with foam.Tada~ The card is done

Card 199

Created on: 27th December 2011
Recipient: 
Purpose: Birthday
Type of card: Easel

A cardstock was scored and folded at half-mark and 2/3 of the front flap.

Background was stamped onto a white cardstock, then layered onto the card base. Image was stamped on various cardstock, cut and assembled. Sentiment was stamped onto the stamped background.

Sentiment was stamped on a piece of card stock. It was then cut and the corners were rounded before layered onto another cardstock. It was then cut and the corners were rounded before layering onto another piece of cardstock. It was cut and the corners were rounded before adhering to the inside of the card with foam.

Tada~ The card is done

Posted by joynwoe

6 notes

Card 198Created on: 26th December 2011Recipient: Nurulain Razak, Joyce Leong, Rose LiyanaPurpose: BirthdayType of card: FoldedA cardstock was scored and folded half. Sentiment was stamped at the lower right corner. Candles were then stamp around the card in different colours.Images and sentiment was stamped inside the card.Tada~ The card is don

Card 198

Created on: 26th December 2011
Recipient: Nurulain RazakJoyce LeongRose Liyana
Purpose: Birthday
Type of card: Folded

A cardstock was scored and folded half. 

Sentiment was stamped at the lower right corner. Candles were then stamp around the card in different colours.

Images and sentiment was stamped inside the card.

Tada~ The card is don

Posted by joynwoe

5 notes

Card 190Created on: 28th November 2011Recipient: Purpose: BirthdayType of card: Explosion/Tato/Origami CardTato was folded. It was then layered with a white cardstock inside it.Sentiment and images were stamped.Twine was tied though the flap to form a draw string to open the card.Close card and tied the twine in butterfly knot to give a finish look.Tada~ The card is done

Card 190

Created on: 28th November 2011
Recipient: 
Purpose: Birthday
Type of card: Explosion/Tato/Origami Card

Tato was folded. It was then layered with a white cardstock inside it.

Sentiment and images were stamped.

Twine was tied though the flap to form a draw string to open the card.

Close card and tied the twine in butterfly knot to give a finish look.

Tada~ The card is done

Posted by joynwoe

26 notes

Card 189Created on: 27th November 2011Recipient: Joyce LeongPurpose: BirthdayType of card: Folded, Multi-layeredCardstock was scored and folded half. The bottom edge was punched with bubble border punch.Pattern paper and cardstock was cut to suitable size, and the corners were rounded before it was layered onto each other.Sentiment was stamped, cut and then tied with twine. The twine was then tied to the buttons. It was then adhere onto the card.Sentiment was stamped onto a piece of paper and then layered inside the card.Tada~ The card is done
 

Card 189

Created on: 27th November 2011
Recipient: Joyce Leong
Purpose: Birthday
Type of card: Folded, Multi-layered

Cardstock was scored and folded half. The bottom edge was punched with bubble border punch.

Pattern paper and cardstock was cut to suitable size, and the corners were rounded before it was layered onto each other.

Sentiment was stamped, cut and then tied with twine. The twine was then tied to the buttons. It was then adhere onto the card.

Sentiment was stamped onto a piece of paper and then layered inside the card.

Tada~ The card is done
 

Posted by joynwoe

24 notes

Card 184
Created on: 24th November 2011Recipient: Purpose: BirthdayType of card: Spinner
A cardstock was scored and folded into a tri-fold card. Cutting die was used to cut a window in the middle of the card
Image was print and cut, before adhering to a cut cardstock. String was adhere between the two cut cardstock. The ends were then adhere to the cardbase.
Background was stamped onto the card. Sentiment was stamped on the last flap
Tada~ The card is done

Card 184

Created on: 24th November 2011
Recipient: 
Purpose: Birthday
Type of card: Spinner

A cardstock was scored and folded into a tri-fold card. Cutting die was used to cut a window in the middle of the card

Image was print and cut, before adhering to a cut cardstock. String was adhere between the two cut cardstock. The ends were then adhere to the cardbase.

Background was stamped onto the card. Sentiment was stamped on the last flap

Tada~ The card is done

Posted by joynwoe

35 notes

Card 177Created on: 3rd November 2011Recipient: Purpose: BirthdayType of card: FoldedCardstock was folded. A piece of paper was cut and the side was punched with border punch. It was then adhere to the inner side of the card.A circle was cut at the bottom right corner. The cherry was made using quilting. It was then adhere to a twine. It was then adhere to the inner side of the card.A piece of cardstock was cut with the bottom right corner cut. The side was layered with another piece of cardstock. It was then layered onto the front of the cardstock.Sentiments were then stamped.Tada~ the card is don

Card 177

Created on: 3rd November 2011
Recipient: 
Purpose: Birthday
Type of card: Folded

Cardstock was folded. 

A piece of paper was cut and the side was punched with border punch. It was then adhere to the inner side of the card.

A circle was cut at the bottom right corner. The cherry was made using quilting. It was then adhere to a twine. It was then adhere to the inner side of the card.

A piece of cardstock was cut with the bottom right corner cut. The side was layered with another piece of cardstock. It was then layered onto the front of the cardstock.

Sentiments were then stamped.

Tada~ the card is don

Posted by joynwoe

16 notes

Card 173Created on: 25th September 2011Recipient: Xuan ZhiPurpose: BirthdayType of card: Circle Window, Magic-Colouring CardCardstock was folded. A circle window and a slit was cut onto the front flap of the card base. Images were stamped onto different cardstock/vellum paper. The vellum was then adhere to the first polaroid image (the square was cut out). The image on the vellum was aligned with the image on the second polariod. Ink was applied to the border of the first polaroid.The image on the second polariod was coloured with watercoloured pencils. A whitecard stock was placed between the two polariod, with the bottom of the polariod adhere together. It was then placed between the two flap of the card base.Accessories was cut and adhere to the front of the card based.Tada~ the card is don

Card 173

Created on: 25th September 2011
Recipient: Xuan Zhi
Purpose: Birthday
Type of card: Circle Window, Magic-Colouring Card

Cardstock was folded. A circle window and a slit was cut onto the front flap of the card base. 

Images were stamped onto different cardstock/vellum paper. The vellum was then adhere to the first polaroid image (the square was cut out). The image on the vellum was aligned with the image on the second polariod. Ink was applied to the border of the first polaroid.

The image on the second polariod was coloured with watercoloured pencils. 

A whitecard stock was placed between the two polariod, with the bottom of the polariod adhere together. It was then placed between the two flap of the card base.

Accessories was cut and adhere to the front of the card based.

Tada~ the card is don

Posted by joynwoe

2 notes

Page 1 of 6

1

2

3

4

5

Next ›